Arizona Mold Inspector - Certified Mold Inspection in the State of Arizona

Arizona Mold Inspector, AZ, Mold Inspector, certified Mold Inspection AZ, Mold Sampling az, About Mold Testing / Mold Sampling Introduction Molds are a natural and important part of our environment. They are ubiquitous and are found virtually everywhere. Molds produce tiny spores to reproduce. These spores can be found in both indoor and outdoor air and on indoor and outdoor surfaces. When mold spores land on a damp spot, they may begin growing and digesting whatever they are growing on in order to survive, leading to adverse conditions. In response to increasing public concern, a number of government authorities, including the United States EPA, California Department of Health Services and New York City Department of Health, have developed recommendations and guidelines for assessment and remediation of mold. Mold Removal AZ Offers Mold Removal,Phoenix Mold Inspection, Chandler Water Damage, Mold Testing for the Phoenix, Mesa, Scottsdale, Gilbert, Queen Creek and Chandler Areas.

Envision 3 Group, Inc. is a full service environmental firm providing certified mold inspectors and offering a broad range of environmental consulting including but not limited to mold testing, mold inspections, asbestos management, site assessments, indoor air quality assessments, mold testing, remediation design and implementation, lead based paint inspections and field services to a wide variety of clients. Our personnel are committed to providing prompt and professional environmental services. We pride ourselves on the increasing number of private, corporate, and government clients who exclusively use Envision's services to solve their complex environmental and regulatory concerns.

Asbestos Bulk Sampling

Mold Inspections

Mold Testing

Asbestos Final Clearance Air Sampling

Pre-Remediation Mold Testing

Post-Remediation Air Testing

Environmental Design and Project Management

Cost Estimating

Regulatory Compliance

Expert Witness/Litigation Support

Mobile PCM Laboratory

Indoor Air Quality Investigations

We are a full service environmental consulting firm founded to enable our clients to respond to their environmental concerns. To achieve this, we have brought together a team of professionals to address our clients individualized issues precisely, responsively, and comprehensively.

To utilize a high degree of professionalism, confidentiality, and integrity toward environmental problem solving and create a successful company with a rewarding work environment that attracts extraordinary environmental professionals, while maintaining a business philosophy that focuses on long-term client relationships based on trust, respect, and efficiency.

By instituting a positive and empowering work atmosphere, we encourage individual and team development. We support team members to contribute to our industry and our community through professional and civic organizations. We believe these are essential elements for responsible and long-term growth.

Integrity is the base from which all our services are carried out. Integrity fosters our pledge to give our clients quality work and cost-effective value. These principles direct our decisions as we build a profitable corporation which reinvests in its future and that of its employees.

Remove source of mold as soon as possible

Rosie Romero
Special for The Arizona Republic
Dec. 17, 2005 12:00 AM

Mold is all around us. Some (mushrooms) you can eat, others (penicillin) make you better, but some can make you sick.

Although the verdict is still out on some research, there's something we know for sure: Get rid of mold when you find it.

Are all molds dangerous to your health? No. The human body can tolerate small amounts of mold; high doses are a concern. For the majority of molds, the most common side effects are allergic reactions due to indoor air- quality problems. Reactions range from sneezing or eye irritation to asthma attacks, and can occur in people with or without allergies. Children, elderly and those with impaired immune systems are more susceptible. Symptoms that are non-allergic or -irritant are not commonly reported, according to the Environmental Protection Agency. However, research is ongoing.
Although most molds produce allergens, under certain conditions some can release mycotoxins. In high doses, these can be toxic. In most cases, the amount produced is extremely small.

What else does mold do? Mold causes damage. This can include an unsightly cosmetic stain or permanent damage to your home. The longer the mold is there, the more damage it will cause.

Where should you look for mold? Mold is a natural fungus found all over the Earth. All types of mold have one thing in common: They need moisture to survive. Some of the most common places to find mold in the home include bathroom (moisture from baths or showers), kitchen (steam from cooking), windows (condensation or bad flashing), attics (from roof leaks), roofs (weather), basements (underground), vents and ductwork (can have condensation and transfers airborne mold spores to other areas of the home) and crawl spaces.

Laboratories such as Aerotech have several analytical tests and services available; some are free. The most common test is the swab sample. The lab sends you everything you need to take a sample of the area. The sample then is sent back to the lab, where microscope and/or culture tests can be taken to determine what the sample is.

Are there precautions that need to be taken while cleaning mold? Especially if you have allergies or asthma, it is recommended to stay on the safe side and wear rubber gloves and goggles. A respirator also can be worn while cleaning. If you're working with drywall or wood, remember to treat the area with Kilz after the moisture problem is fixed and the area is clean and mold-free. If the area is large, or if you're concerned with certain health problems, a professional can do the job.

There are concerns that even dead mold spores may be allergenic. Whenever possible, mold must be removed and not just cleaned.

How can you prevent mold? Mold can grow on a wet surface in 48 hours. The sooner the area is cleaned, the better. You must eliminate the moisture source. If you don't, mold will keep reappearing.

Take preventive measures at home. Occasionally, check areas that are more susceptible to mold growth and get things fixed before much damage occurs. Make sure no sprinklers are hitting the house when they come on, don't use your air-conditioning system if you suspect mold contamination, etc. Additional insulation can prevent condensation on cold surfaces, such as windows, flooring and piping

EN3G - Defining Environmental Solutions